Jump to content

MWTCA August 2019 'What's It' Project (856)


Recommended Posts

"What's It" Basic Rules Reminder

 

For a full run down on this project and rules please go to: "The Patriot Woodworker and MWTCA "What's It" project"

  • Only Patriot Woodworker Members are eligible to participate and receive the award.
  • The MWTCA only accepts a verified source to support your answer, so one should be submitted with your answer, such as a patent, catalog entry, tool book reference, or a respectable website on the subject. Do not let these requirements prevent you from having fun and submitting educated answers on the subject without verification, we can worry about references later. All answers are welcome, as well as healthy debates regarding "What's It".
  • If a verified and referenced answer is not arrived at by the end of each month's "What's It" project, a random draw will be performed for a "One Year MWTCA Club Membership".
  • Only Patriot Woodworker's who participate in this "What's It" topic will be included in the random draw.

 

Ok ladies and gentlemen, we now have our "What's it" live and ready!

The image(s) below is a MWTCA "What's It" image for you to research, and tell us all here in this topic post, just what the heck is it!

 

Project Details

The information provided hereon is all the information that is provided, no further information on this item will be added.

 

856.jpg

 

856a.jpg

 

 

 

Link to comment
Share on other sites

This appears to be just part of the tool.  Looks like the pivot end of a tool and the business ends were pressed onto the serrated ends which are missing.  They appear to completely close making them useless for anything other than a knuckle buster.

Edited by HandyDan
Link to comment
Share on other sites

Wire winder...there is a "feeder" hole going through the block on the leg closest to the camera....pass the wire through, give the tool a few turns, and the wire end goes onto a terminal...How big a loop is set by how wide the legs are spread....Then, to release the "coil" just close the legs back up.  Might be a tool made by Klein?

Link to comment
Share on other sites

  • 1 month later...
  • 4 weeks later...

Catching up here folks, forgive me for letting August roll off my radar! Been a hectic summer here at the ol Morris home. :)

The silver lining of this late award is Gerald will be good all the way through 2020 with his new membership!

 

mwtca.gif

Winner

@Gerald has been selected as this months MWTCA Membership recipient.

Since an acceptable answer was never arrived at for this item, we went to random draw.

 

Award

Gerald, for your participation you have won a Calendar Year membership into the MWTCA.

Please Private Message me your contact info, shipping address, spouse or significant others name (if applicable).

Thank you all for your participation!

 

Links

 

Gristmill Magazine Sample

the gristmill

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...