Popular Post Bob Hodge Posted November 15, 2018 Popular Post Report Share Posted November 15, 2018 This is my entrance to more art than crafts. Many people use their wood to demonstrate their skills. I use a minimum of skills to demonstrate the wood. I am privileged to be the first one to peek inside what God made. So, this is a wall hanging, mostly from scraps,and exploring various finishes. Lignum vitae, red oak, walnut, sepele, hickory, cherry, lace wood, mulberry with finishes of Waterlox, poly, BLO, beeswax. I will work on the framework to make it simpler. Right now, it is a bunch of aluminum wire and hot glue. Starting on Swoosh II today. Grandpadave52, p_toad, Dadio and 3 others 6 Quote Link to comment Share on other sites More sharing options...
lew Posted November 15, 2018 Report Share Posted November 15, 2018 Gorgeous!! Can't wait to see the completed piece! Quote Link to comment Share on other sites More sharing options...
Cal Posted November 15, 2018 Report Share Posted November 15, 2018 Very cool Bob. Do you keep notes so that you will be able to refer back to see what the wood & finish was? While I know this is meant to be viewed as a whole, as a woodworker and tinkerer, I am also interested in the parts. In particular, the second from the top and the second & third from the bottom if you would indulge me... Quote Link to comment Share on other sites More sharing options...
Bob Hodge Posted November 15, 2018 Author Report Share Posted November 15, 2018 13 minutes ago, Cal said: I am also interested in the parts. In particular, the second from the top and the second & third from the bottom if you would indulge me... I started to track the finishes on the back of each one. Then, I ended up painting the back, forgetting to write down the finish. Argh. Well, to your question, second from the top is a small scrap from a walnut crotch. Second up from the bottom is mulberry. I cut through to the mahogany backing, so its now a feature. Third up is lacewood scrap from thirty years ago, ringed with poplar. I won't use poplar again. Gene Howe, DuckSoup, Cal and 1 other 2 2 Quote Link to comment Share on other sites More sharing options...
Gerald Posted November 15, 2018 Report Share Posted November 15, 2018 Nice project. This going to be a wall hanging or a table display? Quote Link to comment Share on other sites More sharing options...
Ron Dudelston Posted November 15, 2018 Report Share Posted November 15, 2018 When you first explained this to me, I didn’t realize the beauty of it. Well done. Quote Link to comment Share on other sites More sharing options...
Bob Hodge Posted November 15, 2018 Author Report Share Posted November 15, 2018 21 minutes ago, Gerald said: Nice project. This going to be a wall hanging or a table display? Wall hanging. It is about 30 inches long. I am doing another one about four feet long. This is all ramping up to what I want to do as a "wood museum" to take up much of a 8 foot by 8 foot space. I had contemplated wood "bricks" of different woods, inlays and other, yet this approach will allow me to add new plates as I encounter those wonderfully unique pieces of wood that one would never use in a larger piece. Occlusions, holes, and other are welcome. I am also experimenting with filling voids with crushed minerals from my wife's hobby. DuckSoup, Cal and Grandpadave52 3 Quote Link to comment Share on other sites More sharing options...
Gene Howe Posted November 15, 2018 Report Share Posted November 15, 2018 (edited) That's a cool idea, Bob. Very pretty. I'm not a turner but, in using mesquite, my favorite wood, I encounter beaucoup voids. I use turquoise powder and chunks to fill with. It cuts easily and, I'd think, would turn just as easily. In fact, I've seen pens with turquoise inlays. Other stones I use have to be crushed to a fine powder and, even so, might quickly dull turning tools. Maybe not EWT carbide, though. Edited November 15, 2018 by Gene Howe Cal 1 Quote Link to comment Share on other sites More sharing options...
Bob Hodge Posted November 15, 2018 Author Report Share Posted November 15, 2018 Gene, thanks. I've wanted to work with mesquite, yet "give me your scraps and cutoffs" in Indiana has not yielded any. I may have to just buy some. And, yes, I think turquoise would look really good as it remains a solid color even when crushed. Many minerals lose their color when crushed as the edges become more reflective e.g. any quartz based mineral. Presently, I have access to green malachite that works well. I add some brass shavings from the local hardware store that makes keys. I am careful to "bury" the minerals below the surface so the tools don't touch them. Experimenting with both CA and epoxy to cover them. CA seems to result in a clearer cover. Love to hear more from you on this topic. Cal and Grandpadave52 2 Quote Link to comment Share on other sites More sharing options...
Gene Howe Posted November 15, 2018 Report Share Posted November 15, 2018 The malachite I've used is found locally and, I find it too friable for what I do. I've seen it in rock stores that seem to be much less crumbly and better color. As to CA vs epoxy resin, for very small voids, CA works great. But, bigger voids require resin. I've found that products advertised as "Casting Resin", specifically, polyester casting resins, are very clear. However, my methods require mixing the powders and small pieces in the epoxy then, packing it in the void. Clarity is not an issue, in that case. Often, the void is partially filled with glue and sawdust, in order to save on the turquoise. I'm cheap. And, this is flat work. The fill will never be seen. hawkeye10, Cal and Dadio 3 Quote Link to comment Share on other sites More sharing options...
Gerald Posted November 15, 2018 Report Share Posted November 15, 2018 I think you can turn turquoise with turning tools but have to sharpen very often. Would not recommend carbide as the brittleness willchip easily when contacting hard (rock) items or metal Cal and Grandpadave52 2 Quote Link to comment Share on other sites More sharing options...
Steve Krumanaker Posted November 15, 2018 Report Share Posted November 15, 2018 Never would've thought of doing something like. Very creative I think Steve Cal 1 Quote Link to comment Share on other sites More sharing options...
Gene Howe Posted November 15, 2018 Report Share Posted November 15, 2018 Gerald, I've run it through my planer with HSS blades without nicks. My carbide tipped saw blades don't seem to mind, either. Bear in mind though, it's small pebbles or powder. Gerald, Cal and Grandpadave52 3 Quote Link to comment Share on other sites More sharing options...
Grandpadave52 Posted November 15, 2018 Report Share Posted November 15, 2018 4 hours ago, Bob Hodge said: in Indiana has not yielded any. I guess I had forgotten you are a Hoosier Bob and live "next door" to Ron D...Seem to recall now though you living very close to Ivanhoe's Your transition to wood art is amazing as is your appreciation for various unique wood species, defects & all. I'm sure you will as any great artist does, but be sure you sign & date the overall piece somewhere. Cal and DuckSoup 2 Quote Link to comment Share on other sites More sharing options...
Ron Dudelston Posted November 15, 2018 Report Share Posted November 15, 2018 45 minutes ago, Grandpadave52 said: I guess I had forgotten you are a Hoosier Bob and live "next door" to Ron D...Seem to recall now though you living very close to Ivanhoe's Bob, our secret is out. Dave, Bob and I attend the same church. More important, we’re good friends. Cal, Gerald and Grandpadave52 3 Quote Link to comment Share on other sites More sharing options...
Grandpadave52 Posted November 16, 2018 Report Share Posted November 16, 2018 28 minutes ago, Ron Dudelston said: More important, we’re good friends. Even more important, do you share Ivanhoe's tenderloins and ice cream? 31 minutes ago, Ron Dudelston said: Bob and I attend the same church. Cal 1 Quote Link to comment Share on other sites More sharing options...
Ron Dudelston Posted November 16, 2018 Report Share Posted November 16, 2018 Only on special occasions. Cal and Grandpadave52 1 1 Quote Link to comment Share on other sites More sharing options...
Larry Buskirk Posted November 16, 2018 Report Share Posted November 16, 2018 Very nice Bob. I've tried giving Mulberry away in the past without any takers, after seeing this, I'll probably have to hang on to some for myself and others. I've got a White Mulberry tree that is now on it's last legs. I've also got Red Mulberry that are in need of trimming. @Gene Howe I forgot to pick up a flat rate box when I went to vote, the wife was getting a bit uncomfortable after standing waiting in line, and wanted to get home. Would you like some of the Mulberry to go along with the Box Elder? I just remembered that I've also got Swamp White Oak. The power company pretty much butchered our biggest one when the power lines came in contact with the tree and started a fire in the tree and the line came down in the process. Want some of that also? Cal 1 Quote Link to comment Share on other sites More sharing options...
Gene Howe Posted November 16, 2018 Report Share Posted November 16, 2018 Larry, I'm easy. Anything you send will be greatly appreciated. And, take your time. No hurry. Larry Buskirk 1 Quote Link to comment Share on other sites More sharing options...
Bob Hodge Posted November 16, 2018 Author Report Share Posted November 16, 2018 Thanks for the affirmation of my attempt to be artsy. Here is my second attempt. I share it here not for more applause but to show the cool wood that goes into it. The variety of colors and grains in wood, most from scraps, just blows me away - lignum vita, red oak, cherry, red bud - a little spalting, white oak with bubinga inserts. The middle is my favorite - birds-eye maple with a bark inclusion. I learned the stain-sand, stain-sand, BLO technique here, making the bird's eyes dance before your eyes. Then, a walnut frame around part of a yew bush root ball. I won't try that again as I learned how root balls encapsulate rocks. Then, a mystery wood from Mexico - oily stuff that I also learned how to finish on this group. So, with good advice here and pieces donated from many friends, this is a group project. DuckSoup, Grandpadave52, p_toad and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.