Jump to content
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble
John Moody

Saturday, Dec 12, What's on Your Patriot Woodworker Agenda?

Rate this topic

Recommended Posts

I seem to be running behind a lot here lately. Here it is Saturday afternoon and I am just getting my Friday or Saturday post up.

 

We have been working on an order for Cheese Boards this weekend.

566c847f4d431_cheeseboardblanks.thumb.jp

 

These are the blanks for the cheese boards. We have got to make 30 and ship them Monday. While I have been cutting things out, Beth has been doing lots of sanding.

566c84e47c756_SandingCheeseBoards.thumb.

 

I have about half of them oiled and branded and she is working on the rest of them.

 

566c848db4e68_cheeseboards.thumb.jpg.90d

 

In the mean time I have cut and glued panels to make a 24" lazy susan made of White Oak.

566c84a6e96f8_lazysusan.thumb.jpg.f6b326

 

I also had so much cedar in the shop I picked up the cut offs and glued the panels to make a Cedar Chest.

 

566c849a9923d_cedarchestpanels.thumb.jpg

 

and as soon as we finish the cutting boards we will start on three Green Egg Tables that will be picked up before Christmas. Wow Christmas is getting here fast. The elves in the shop may be on overtime till Christmas.

 

So what is going on in your Patriot Woodworker shop? We here at TPW love to see all the projects you are working on so post the project and pictures.

 

Well, I am back to the shop, but I will check in later...

 

 

Share this post


Link to post
Share on other sites

My wife and I are doing a local craft show.  We got 2 hours to go and we have made $120 over our space fee. Not the best show as it is in a lower income area, but it does help Momma's Christmas Gift Fund. Hopefully we can make a few more sales before we leave.

Share this post


Link to post
Share on other sites

John,

I've been working on my "Patriot Picking" pick from last Sunday. :D

Front.thumb.JPG.1186a44a6f1c94f66a368865

This is going to be "Cool" B)

Share this post


Link to post
Share on other sites
47 minutes ago, Larry Buskirk said:

John,

I've been working on my "Patriot Picking" pick from last Sunday. :D

Front.thumb.JPG.1186a44a6f1c94f66a368865

This is going to be "Cool" B)

 

 

I love it Larry. That is such a cool Emerson fan. Brass blades and wire frame. Awesome pick!!

 

 

Share this post


Link to post
Share on other sites

Working on the 2nd of 2 lofts with a desk and shelves.  This afternoon we wrapped all the Christmas presents.  Yippe, we're done for anoher year.

 

Share this post


Link to post
Share on other sites
2 hours ago, John Moody said:

 

 

I love it Larry. That is such a cool Emerson fan. Brass blades and wire frame. Awesome pick!!

 

 

Thanks John,

It's "My Fan Club". ;)

Share this post


Link to post
Share on other sites

Now that the Burnt Room is done, and my son is moving his stuff back into it..

 

been fighting and a-cussing what is left of the walnut.....got enough milled down to at least clamp something up

566cfb3a96b79_panelglueup.thumb.JPG.e167

Resawn some walnut, three board glue up.    might be making a small table/night stand later?   Stanley No.5c with a cmabered iron to flatten the worse of this panel. 

Will have to see what the Single Brain Cell Sketch Up draws up for this ....

 

Edited by steven newman

Share this post


Link to post
Share on other sites

John - " I also had so much cedar in the shop I picked up the cut offs and glued the panels to make a Cedar Chest. " - - - - Ah, too bad you have so much when the rest of us are having trouble just getting cedar that is 4" wide.  :P

 

As for this woodworker - Since cutting down all those trees last year and not being able to do anything with them, the grandson paid us a visit this weekend and said something like "Hey, grandpa, let's split some wood" ! ! ! !  Rented the splitter and started out trying to fill me wood shed.  How did we do?

work1.png.f4d9af3d2332f85163a3c482f69b25

 

Along the way, saw a couple of pieces that just yelled to have something more done with them.  Planed one and will work on the other.  2 pix below

work3.png.90ed74ba137d43cadccef36dd67390work2.png.9613c2be0badaeac5c33115362f47c

 

December the 13th and outside temp is 74 degrees ! ! ! ! ! ! !

 

 

Share this post


Link to post
Share on other sites

Not much in the way of wood working getting done. Shop's staying around 30*.

But we are keeping real busy this year with the Santa & Mrs. Claus visits! May be able to get away after Christmas for a short vacation!

 

big timber '13.JPG

Share this post


Link to post
Share on other sites

we were at our last show of the season now its off to the shop to finish up some Christmas orders then the arduous task of cleaning begins.

Share this post


Link to post
Share on other sites

John, it seems that keeping the shop clean (or at least workable) is a never ending task.  Good Luck.

Share this post


Link to post
Share on other sites

I actually got a pair of fifty cent handplanes all cleaned and tuned up..

566ee5f5d157f_No.035.thumb.JPG.338ce4f59

Ohio Tool Co. of Auburn NY,  USA   No.035.   needed a chipbreaker and a lever cap.   Waiting on the several coats of finish to stop soaking into the DRY wood parts

Mohawk.thumb.JPG.49a5ef520f5a8aa47087afc

And the other "Cheap plane".    Millers Falls made a secondary line called Mohawk-Shelburne.   This is the #4 sized one.    I traded out the very rough lever cap for a better one,  All else was just a clean up and a tune up.   Had this one working nicely..

566ee76ee9d9a_topcleanup.thumb.JPG.4c48e

It was cleaning up after the scrub-jack plane.    Top needed to be flattened.   End grain needed some work, too

566ee7f689433_cleanedendgrain.thumb.JPG.

That Mohawk worked nicely on end grain.  Wasn't too worried about blowing out the end at the corner, had a plan

566ee87139254_shapedcorners.thumb.JPG.e0

All four corners got the round-about treatment.   I also got some aprons milled..

566ee8d4d362b_apronparts.thumb.JPG.bacae

The square thing got resawn.   all the parts were cleaned up with the #4 Mohawk.   made a bit of a mess, though...

566ee946061b9_messybench.thumb.JPG.5735e

Got all these parts put away, as I have bigger things to do...

566ee9addfd57_legblank.thumb.JPG.f9140bd

SHOULD be able to get four leg blanks out of this slab of White Oak?    There is enough there to make four 20" long legs.   Hmmm, turned, or tapered?   Maybe NEXT weekend to find out..

Share this post


Link to post
Share on other sites

I'm hoping I can convince the fire department to bring over their exhaust fans as practice. I'll have them suit up in SCBA gear and go in with leaf blowers to get it all airborne. then the exhaust fans should be able to suck it all out of the shop and into the neighbors yard.

 

Share this post


Link to post
Share on other sites
8 hours ago, John Hechel said:

I'm hoping I can convince the fire department to bring over their exhaust fans as practice. I'll have them suit up in SCBA gear and go in with leaf blowers to get it all airborne. then the exhaust fans should be able to suck it all out of the shop and into the neighbors yard.

 

That's wrong but yet so very right on so many counts!!  If it works, let me know.  Just remember the prevailing winds are west to east and I live in Indiana.

Share this post


Link to post
Share on other sites
4 hours ago, Cliff said:

does it count if by woodworking  I'm working on my fireplace  custom making and installing a screen hangar?

 

Yes that counts too!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Who We Are

Operation Ward 57 Challenge Coin Display Project

We are a woodworking community with an emphasis on sharing and learning the skilled craft of woodworking and all of its related disciplines. Our community is open to everyone who wishes to join us. We support our American veterans and active duty, being a veteran is not a prerequisite to join. Join us now!

Objective

Air Force Command Center Plaque

Of course just like most online woodworking communities we are centralized in the arts, crafts, and trades that are woodworking. But, we have another focus in our Patriot Woodworker community, we are the only woodworking community that was founded on our care and concern for our disabled veterans.

Volunteer

Patriot Woodworker Volunteers

The Patriot Woodworkers are an all volunteer community, from the staff and hosts who run our online woodworking community to the members who frequent our forums, you'll find volunteers in all of us. We are not on a payroll, unless you consider the spiritual rewards gained from volunteering, as compensation.

Education

Logging

One of the many projects we are working on is a wiki for our online community. A wiki is a great way for woodworkers and enthusiasts to share their knowledge to others, and to impart their knowledge for others to learn from, and utilize as well for their own benefit. We hope you'll consider being a wiki contributor.

×