<?xml version="1.0"?>
<rss version="2.0"><channel><title>Finishing Latest Topics</title><link>https://thepatriotwoodworker.com/forums/forum/32-finishing/</link><description>Finishing Latest Topics</description><language>en</language><item><title>dye or stainable wood filler after curing and sanding</title><link>https://thepatriotwoodworker.com/forums/topic/43380-dye-or-stainable-wood-filler-after-curing-and-sanding/</link><description><![CDATA[<p>i have a large supply of white and black oak with lots of worm holes.  My spouse does not like the worm holes but so far I am unable to find any filler that once cured and sanded can then be colored by dye or stain any body else?  Usually I just overcoat with poly or shellac or lacquer but then color with a marker then add in more top coat.</p><p>Admin if this should go into general woodworking please move it.</p><p></p>]]></description><guid isPermaLink="false">43380</guid><pubDate>Tue, 03 Nov 2026 23:24:18 +0000</pubDate></item><item><title>Carnauba wax?</title><link>https://thepatriotwoodworker.com/forums/topic/43315-carnauba-wax/</link><description><![CDATA[<p>Hi, probably simple question but I like to use carnauba on smaller turns the problem I have is the bars I've gotten are as hard as rock practically and other is usually a soft wax mixture. When I try to use the bar it leaves ring marks on the wood because its so hard it not from a lack of melting. Anybody point me to a place that has bars similar to beeswax or do they simply not exist? Thanks</p>]]></description><guid isPermaLink="false">43315</guid><pubDate>Fri, 02 Oct 2026 18:54:50 +0000</pubDate></item><item><title>metamerism and color matching</title><link>https://thepatriotwoodworker.com/forums/topic/43351-metamerism-and-color-matching/</link><description><![CDATA[<p><strong>Common Types of Metamerism</strong></p><ul><li><p><strong><span style="font-family: Arial, Helvetica, sans-serif;">Illuminant Metamerism:</span></strong><span style="font-family: Arial, Helvetica, sans-serif;"> A color match breaks down because the light source changes (e.g., car bumpers matching the body in a showroom, then looking different outside under the sun).</span> [<a rel="external nofollow" href="https://en.wikipedia.org/wiki/Metamerism_(color)"><u>1</u></a>, <a rel="external nofollow" href="https://sensing.konicaminolta.asia/resources/youtube-videos/color-education-how-to-identify-and-evaluate-metamerism/"><u>2</u></a>]</p></li><li><p><strong><span style="font-family: Arial, Helvetica, sans-serif;">Observer Metamerism:</span></strong><span style="font-family: Arial, Helvetica, sans-serif;"> Two samples match for one person, but look slightly different to another person due to individual differences in human color vision.</span> [<a rel="external nofollow" href="https://www.sciencedirect.com/topics/engineering/metamerism"><u>1</u></a>, <a rel="external nofollow" href="https://qualitest.us/blogs/insight/what-is-metamerism"><u>2</u></a>]</p></li><li><p><strong><span style="font-family: Arial, Helvetica, sans-serif;">Geometric (Angle) Metamerism:</span></strong><span style="font-family: Arial, Helvetica, sans-serif;"> A match changes depending on the angle at which you view or illuminate the object.</span> [<a rel="external nofollow" href="https://www.gtilite.com/2019/05/understanding-metamerism/"><u>1</u></a>]</p></li><li><p><strong><span style="font-family: Arial, Helvetica, sans-serif;">Field-Size Metamerism:</span></strong><span style="font-family: Arial, Helvetica, sans-serif;"> A match fails when the size of the color field in your field of vision changes (such as looking at a tiny dot versus a large painted wall)</span></p></li></ul><p>Geometric metamerism is common in veneered table tops. If there are 4 parts in right angles to each other, from one direction, two will look darker and two lighter, rotate 90 degrees and they can all look the same, and another 90 degrees and the dark ones now look lighter and the lighter ones darker.</p>]]></description><guid isPermaLink="false">43351</guid><pubDate>Tue, 20 Oct 2026 19:16:34 +0000</pubDate></item><item><title>Water marks / blushing</title><link>https://thepatriotwoodworker.com/forums/topic/43305-water-marks-blushing/</link><description><![CDATA[<p>When some finishes (most often shellac or lacquer) get moisture, like from a drip or condensation on a glass or pizza box, they blush or turn whitish. What can you do to resolve this?</p><p></p><p>I've used several methods.</p><p></p><ul><li><p>Some people say put down a cloth and run an iron over it. I tried this once and it damaged the finish. REJECT Also people say heat with a hair drier. Nah.</p></li><li><p>Other people say rub on some mayonnaise and let sit overnight, then wipe off. This was not a good option for a repair call to do this, tell them to wipe it off in the morning and hope that it worked and you don't have to go back. Also, Bob Flexner once told me he wished he'd never recommended doing this. REJECT</p></li><li><p>Oil of some sort and cigarette ashes. I don't smoke.</p></li><li><p>My go-to was to use a wiping cloth made especially for removing the spots. It always worked. But it left a spot that was bit oily and maybe a bit glossier. No problem to clean up and it with some touch-up spray. (see attachment)</p></li><li><p><span data-i-color="root"><span style='font-family: Georgia, "Times New Roman", serif;'>Proprietary products, normally a slow or weak solvent. Might be called a "restorer", "blush eliminator", "ring remover," or "reflow solution." Applied and left to dry. I had a regular customer who was in a site with a too-small warehouse. So often the pieces needing work were in a semi trailer backed up to a dock. I'd spray on some touch up spray and it would blush during the humid summer weather. So then I'd have to spray on some blush remover and let it dry for several minutes. Then repeat multiple times.</span></span></p></li><li><p>My go-to was to use a wiping cloth made especially for removing the spots. It always worked. But it left a spot that was bit oily and maybe a bit glossier. No problem to clean up and it with some touch-up spray. (see attachment)</p></li><li><p>In a severe case, a moving blanket was on a leaking moving van and blushed an antique piece. The owner, who must watch Antiques Road Show, did not want it stripped and refinished. I used the cloths above, working but slow. Since I figured on the age it was probably shellac, I put some denatured alcohol on a cloth and did a quick land-and-take-off wipe. The blush disappeared immediately</p><p></p><p></p></li></ul><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="154115" src="https://thepatriotwoodworker.com/uploads/monthly_2026_09/water_mark_before-300x300.jpg.7bbf9772763caab8480c20582f1b945b.jpg" alt="water_mark_before-300x300.jpg" title="water_mark_before-300x300.jpg" width="300" height="300" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_09/water_mark_before-300x300.jpg.7bbf9772763caab8480c20582f1b945b.jpg" loading="lazy"></p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="154116" src="https://thepatriotwoodworker.com/uploads/monthly_2026_09/water_mark_after-300x300.jpg.1fa9071f690f0f6e897a85241f378f93.jpg" alt="water_mark_after-300x300.jpg" title="water_mark_after-300x300.jpg" width="300" height="300" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_09/water_mark_after-300x300.jpg.1fa9071f690f0f6e897a85241f378f93.jpg" loading="lazy"></p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="154117" src="https://thepatriotwoodworker.com/uploads/monthly_2026_09/water_mark_2_before_small-300x300.jpg.7f8a43ac9af50c2e34a494bd3bf4c042.jpg" alt="water_mark_2_before_small-300x300.jpg" title="water_mark_2_before_small-300x300.jpg" width="300" height="300" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_09/water_mark_2_before_small-300x300.jpg.7f8a43ac9af50c2e34a494bd3bf4c042.jpg" loading="lazy"></p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="154118" src="https://thepatriotwoodworker.com/uploads/monthly_2026_09/water_mark_2_after_small-300x300.jpg.5c8df8394437ad68464576926526a67b.jpg" alt="water_mark_2_after_small-300x300.jpg" title="water_mark_2_after_small-300x300.jpg" width="300" height="300" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_09/water_mark_2_after_small-300x300.jpg.5c8df8394437ad68464576926526a67b.jpg" loading="lazy"></p><p><a class="ipsAttachLink" data-fileid="154114" data-fileext="pdf" data-extension="pdf" href="https://thepatriotwoodworker.com/applications/core/interface/file/attachment.php?id=154114&amp;key=d20141a1e0df2215ee7ddec2d0e953c8" rel="">WHITE-RING-REMOVER-HOMAX_823c9ae6-ffa1-41f7-bda1-791cd77f5ebd.eaec0694bbbdf2d16998f2226fbbe2e9.pdf</a></p>]]></description><guid isPermaLink="false">43305</guid><pubDate>Mon, 28 Sep 2026 20:32:27 +0000</pubDate></item><item><title>Stain boards -- I'd like a walnut stain, please.</title><link>https://thepatriotwoodworker.com/forums/topic/43265-stain-boards-id-like-a-walnut-stain-please/</link><description><![CDATA[<p>If you are trying to stain something, never rely on the label being something like "special walnut", "medium walnut", "colonial walnut", whatever. There are several variances in the color</p><ul><li><p>The wood that's being stained.* Walnut, cherry, maple and poplar will not necessary take the same color of the same stain. Grain patterns, poriosity, raw wood color, and hardness have effects.</p></li><li><p>The manufacturer's name on the can. The same name can look radically different, even on the same wood. I have about 3 different cans of 'Espresso' stain and each looks different*</p></li><li><p>How carefully you stir the can. If the stain contains pigment, there will be sludge at the bottom of a not recently used can. Failure to stir adequately will affect the color. Stains consist of dyes (that are dissolved in the carrier), pigments (powders that are suspended by stirring), either or both. (Excluding chemical reactions that are typically not made except in the shop.)</p></li><li><p>Dye only and pigment only stains can look different, as can wipe on and gel stains. (spotching, lighter, or clear staining)</p></li><li><p>How many coats you apply and how well you wipe off the excess.</p></li></ul><p></p><p>* I have a sample of five different species of wood with 3 different "walnut" stains on them. None look the same.</p><p></p><p>The best solution is to run some samples. Here is a set of samples on poplar, each made as I used the stain on a project.</p><p></p><p>I also have some "step boards" that show a set of stains on different woods, stain only, one coat of finish, and two coats of finish,</p><p></p><p></p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="153695" src="https://thepatriotwoodworker.com/uploads/monthly_2026_09/IMG_20260906_144018964.thumb.jpg.18fb6da0bdcab58aebfb1314a80b2320.jpg" alt="IMG_20260906_144018964.jpg" title="IMG_20260906_144018964.jpg" width="449" height="600" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_09/IMG_20260906_144018964.jpg.fe7db29991ca816a0b3dbe09135a5de1.jpg" loading="lazy"></p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="153696" src="https://thepatriotwoodworker.com/uploads/monthly_2026_09/IMG_20260906_144152784_HDR.thumb.jpg.1b58419720d00e1d58014ce9ce7648fb.jpg" alt="IMG_20260906_144152784_HDR.jpg" title="IMG_20260906_144152784_HDR.jpg" width="449" height="600" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_09/IMG_20260906_144152784_HDR.jpg.4734407f7312cfcf2e038266fc6d5aa5.jpg" loading="lazy"></p>]]></description><guid isPermaLink="false">43265</guid><pubDate>Sun, 06 Sep 2026 20:06:31 +0000</pubDate></item><item><title>Exterior gate finish</title><link>https://thepatriotwoodworker.com/forums/topic/43186-exterior-gate-finish/</link><description><![CDATA[<p><span style="font-family: inherit;">well, i've no idea how to accomplish what my sisterinlaw has asked</span><br><span style="font-family: inherit;">she has the absolutely beautiful Sapele gate, that has a relief of an egret in it, her location is on Alemeda, <abbr title="(Cyano Acrylate) Cyanoacrylates are a family of strong fast-acting adhesives with industrial, medical, and household uses. Cyanoacrylate adhesives have a short shelf life if not used, about one year from manufacture if unopened, one month once opened. They have some minor toxicity.">Ca</abbr>. island, the weather is wet, fog, ect. the gate maker is no more, the gate still has its normal Sapele color at this point, but she needs something to finish it with that will with stand the elements, and assist in the egret figure to become prominent, need some direction, ideas, ect. anyone, and thanks before hand, appreciate any direction,</span><br><span style="font-family: inherit;">regards</span><br><span style="font-family: inherit;">rj in az</span></p>]]></description><guid isPermaLink="false">43186</guid><pubDate>Mon, 03 Aug 2026 01:41:23 +0000</pubDate></item><item><title>Dent, Gash, Scratch Repairs On Antique Dining Table</title><link>https://thepatriotwoodworker.com/forums/topic/43133-dent-gash-scratch-repairs-on-antique-dining-table/</link><description><![CDATA[<p>I'm guessing <a href="https://thepatriotwoodworker.com/profile/4328-kmealy/" class="ipsMention" data-mentionid="4328" data-ipshover="" data-ipshover-target="https://thepatriotwoodworker.com/profile/4328-kmealy/?do=hovercard" rel="">@kmealy</a> will have some opinions on this one, and if anyone else has some suggestions I'd greatly appreciate it. I've been involved in this project:</p><div class="ipsEmbeddedOther" data-og-user_text="https://thepatriotwoodworker.com/forums/topic/43113-heritage-henredon-no-811/"><iframe src="https://thepatriotwoodworker.com/forums/topic/43113-heritage-henredon-no-811/?do=embed" data-embedcontent="" data-internalembed="" data-controller="core.front.core.autosizeiframe" data-embedauthorid="1" data-ipsembed-contentapp="forums" data-ipsembed-contentclass="forums_Topic" data-ipsembed-contentid="43113" data-ipsembed-timestamp="1784602767" allowfullscreen="" data-og-user_text="https://thepatriotwoodworker.com/forums/topic/43113-heritage-henredon-no-811/" loading="lazy"></iframe></div><p>And it has scratches, dents, and a gash, the gash is through the mahogany veneer table top, one of the extensions, and of course there are scratches all over the edge of the table, and legs, and they had asked if I can take a stab at repairing them. I have watched a few videos, and I really like that burn in melted wax method, and colored markers, and a little painting with a fine tip brush to take care of all kinds of various surface damage and defects.</p><p>Can someone suggest an over all furniture repair kit that I could purchase? </p><p>Repairing surface damage has always been intimidating to me, but after seeing some pro folks perform the task on YouTube, I feel a tiny bit more comfortable tackling the job. Of course the pro's like Keith Mealy are going to make it look easy, but at least I have an idea now and I can attempt it.</p><p></p><p>So, any suggestions to a kit full of repair supplies, if one even exists?</p><p>Thanks!</p>]]></description><guid isPermaLink="false">43133</guid><pubDate>Tue, 21 Jul 2026 03:04:33 +0000</pubDate></item><item><title>Refinish or reburbish this finish</title><link>https://thepatriotwoodworker.com/forums/topic/42890-refinish-or-reburbish-this-finish/</link><description><![CDATA[<p>I have been tasked with refinishing at table that my grandpa built.</p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="150173" src="https://thepatriotwoodworker.com/uploads/monthly_2026_05/20260502_105845.thumb.jpg.2e1d30b8d9c62f2d3582a345448ac2c7.jpg" alt="20260502_105845.jpg" title="20260502_105845.jpg" width="600" height="450" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_05/20260502_105845.jpg.5003c8e4583a5d040f210720ddc91266.jpg" loading="lazy"></p><p>But as you can see the top of the table has had the worst of it which is normal.</p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="150174" src="https://thepatriotwoodworker.com/uploads/monthly_2026_05/20260502_105856.thumb.jpg.ec3622154d87396f2bed10c3064c092e.jpg" alt="20260502_105856.jpg" title="20260502_105856.jpg" width="600" height="450" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_05/20260502_105856.jpg.0d421a134be8f7be57613ddd866b75d7.jpg" loading="lazy"></p><p>How to address the round spots and scratches?</p><p>Should i  chemicaly strip the finish and then sand carefully; then  restain with a matching stain or dye.</p><p>The table top is approximately 3/8" thick.</p><p>The top is rough to the touch and I think the stain was something with black in it.  </p><p>I think it was a variation  of golden oak.</p>]]></description><guid isPermaLink="false">42890</guid><pubDate>Sat, 02 May 2026 16:27:50 +0000</pubDate></item><item><title>Finishing (white) oak</title><link>https://thepatriotwoodworker.com/forums/topic/43050-finishing-white-oak/</link><description><![CDATA[<p>My son's recent trip from central NYS included 15 <abbr title="(Board Foot) A board foot is actually a measure of volume. By definition a board foot is one square foot one inch thick. To calculate board footage use the following formulas: Board Footage = width in inches x length in feet x thickness in inches.">bf</abbr> of <abbr title='1" thickness'>4/4</abbr> S2S white oak in his truck.  Planning to make tool totes for my son and grandson.</p><p></p><p>I've never used white oak before, but have used red oak many years ago.   My foggy memory recalls using a paste filler to fill/seal the pores of the red oak.  It didn't seen to affect the rest of the finishing at all.  Not sure, but the finish was probably poly.  I haven't seen any mention of a filler in many years. </p><p></p><p>So, is that still a thing? </p><p>Is this product (or similar) still available?</p><p>Is it good to use on white oak as well?</p><p></p><p>Plus, any finishing tips for white oak would be appreciated.</p><p>TIA, Jim</p><p></p><p></p><p></p>]]></description><guid isPermaLink="false">43050</guid><pubDate>Wed, 24 Jun 2026 20:45:52 +0000</pubDate></item><item><title>Spalted Maple</title><link>https://thepatriotwoodworker.com/forums/topic/43048-spalted-maple/</link><description><![CDATA[<p>We had a maple tree removed about 5 years back and had pretty much decayed, I was able to save a couple of logs. I was able to cut one open and gained enough material for a keepsake box for my granddaughter. </p><p> My question is what a good finish would be to apply and not hide the spalting? Also, I have a piece of oak I'll use for the lid with similar grain issues.  I'm open for any advice. thanks.</p><p></p><p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="151907" src="https://thepatriotwoodworker.com/uploads/monthly_2026_06/PXL_20260620_1807587391.thumb.jpg.c8f46d4f7cb18f81bea03cea801a820b.jpg" alt="PXL_20260620_180758739[1].jpg" title="" width="451" height="600" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_06/PXL_20260620_1807587391.jpg.9466ab6371f84e83fcef48579da648b3.jpg" loading="lazy">             <img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="151908" src="https://thepatriotwoodworker.com/uploads/monthly_2026_06/PXL_20260620_1809135631.thumb.jpg.ee0a5bbf40e3a68aa1ba755245e2e695.jpg" alt="PXL_20260620_180913563[1].jpg" title="" width="451" height="600" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_06/PXL_20260620_1809135631.jpg.a5cbc86316ffd05b87e65f4da4273201.jpg" loading="lazy"></p><p></p>]]></description><guid isPermaLink="false">43048</guid><pubDate>Wed, 24 Jun 2026 13:29:20 +0000</pubDate></item><item><title>Refinish or refurbish II</title><link>https://thepatriotwoodworker.com/forums/topic/43000-refinish-or-refurbish-ii/</link><description><![CDATA[<p>I have water damage from consendation on the inside of the windows.</p><p>My spouse wants this fixed before I then seal the picture window what had considerable consendation on the outside but the two adjacent windows had none.</p><p>So I think there is an air leak that is making out outter pane colder that the others.  Maybe everything is sealed but here are the pictures anyway.</p><p>The oak seat has some type of finish the pine windows were water based stained and never finished.  When wiped with distilled water and the rag turned brown.</p><p>Obiously I need to strip the oak assumed to be plywood vener.  I tried DNA with no results so no shellac.  I tried mineral spirits and lacq thinner and they just seem to clean were the oak has finish.</p><p>How best to resolve this issue?  I do have one place where oxy acid is requried but do I strip the oak and pine with citric based stripper?  I only want to strip the affected areas because a total strip job is too large.</p><p>Then some help on how blend then stains so that you do not notice were old and new is.</p><p></p><p>Thanks all </p>
<p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="151413" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_06/1385.jpg.702768e9de1522bbea59999978aa7090.jpg" src="https://thepatriotwoodworker.com/uploads/monthly_2026_06/1385.thumb.jpg.15f50ac67d28b79c09639d065f311793.jpg" height="450" width="600" alt="1385.jpg" loading='lazy'></p>
<p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="151414" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_06/1387.jpg.863fbe3da9957a6b37b5f99fbc4d8ec4.jpg" src="https://thepatriotwoodworker.com/uploads/monthly_2026_06/1387.thumb.jpg.79c53217fb768cc154e800c0db585ca4.jpg" height="450" width="600" alt="1387.jpg" loading='lazy'></p>
<p><img class="ipsImage ipsImage_thumbnailed ipsRichText__align--block" data-fileid="151415" data-full-image="https://thepatriotwoodworker.com/uploads/monthly_2026_06/1386.jpg.d59053ea7bbade321e543811903b6cbc.jpg" src="https://thepatriotwoodworker.com/uploads/monthly_2026_06/1386.thumb.jpg.3f448356c9f8bdfef170671ca8265edb.jpg" height="450" width="600" alt="1386.jpg" loading='lazy'></p>]]></description><guid isPermaLink="false">43000</guid><pubDate>Mon, 08 Jun 2026 23:31:38 +0000</pubDate></item><item><title>question about shellac</title><link>https://thepatriotwoodworker.com/forums/topic/42944-question-about-shellac/</link><description><![CDATA[<p>I use shellac when I need a gloss finish, it works best for me as it flows into the fretwork that I cut.</p><p>I have a new (to me) issue. I just finished a name plate for a friend of a friend, and when I applied the finial coats of rattle can shellac the finish pulled away from the sides, but not the top or bottom.</p><p>Any ideas what went wrong and how to prevent this in the future?</p><p><img class="ipsImage ipsRichText__align--block" data-fileid="150737" src="https://thepatriotwoodworker.com/uploads/monthly_2026_05/20260521_082421.thumb.jpg.6ba494aa29492eb416c8e1304e813391.jpg.fb89468572a59906561da5388bb859f4.jpg" alt="20260521_082421.thumb.jpg.6ba494aa29492eb416c8e1304e813391.jpg" title="" width="600" height="450" loading="lazy"></p>]]></description><guid isPermaLink="false">42944</guid><pubDate>Fri, 22 May 2026 04:45:05 +0000</pubDate></item><item><title>spraying gloss lacquer from rattle can</title><link>https://thepatriotwoodworker.com/forums/topic/42926-spraying-gloss-lacquer-from-rattle-can/</link><description><![CDATA[<p>please bear with me on this.</p><p></p><p>subject===bowl from a board (economy bowl). So you will have some end grain. I picked a bowl from a board instead of a segmented bowl b/c segmented bowls are mostly side grain</p><p></p><p>object==to obtain a decent gloss finish . economically.</p><p></p><p>Material===lacquer----NOT POLY</p><p></p><p>Is there any advantage/disadvantage to using matte or semi gloss as a "base" coat(s) before applying several coats of gloss?</p><p>Both base coats &amp; finish coats from a rattle can.</p><p></p><p>My thoughts are the matte/semi gloss will fill the end grain in the wood and build to a finish more economically (?) than using gloss for all the coats. And as a benefit probably less sanding in between coats.</p><p></p><p>Spray a couple of base coats, sanding in between where &amp; if necessary, then finish with the appropriate amount of gloss coats to achieve the desired sheen/shine .</p><p></p><p>alternatively:</p><p>Spraying on matte/semi gloss and then wiping on a gloss finish.</p><p></p><p>Thoughts???</p>]]></description><guid isPermaLink="false">42926</guid><pubDate>Fri, 15 May 2026 15:50:31 +0000</pubDate></item><item><title>have some green Kool-Aid</title><link>https://thepatriotwoodworker.com/forums/topic/42814-have-some-green-kool-aid/</link><description><![CDATA[<p>I keep seeing people recommend (for anything, one trick pony), various new products -- Osmo, PolyOx, Rubio, Odie's, etc.   I have never used any of these, and wonder what the attraction is.  And I don't believe there is one finish that is best for everything.  Finish needed for a picture frame that will never be touched or have anything on it is different that what is needed for a cutting board, dining table, or child's toy.</p><p></p><p>There is also the "secret recipe" of equal parts varnish, boiled linseed oil, and mineral spirits (or turpentine).  Bob Flexner once wrote that he often was told about this "secret" that is not really a secret.  It's basically the same as most common Danish oils with a little more varnish and a little less mineral spirits.</p><p></p><p>I also see people recommending "spar varnish" (often spar urethane) for interior furniture.  Not sure why.  These are "long oil" varnishes, meaning the receipe for the varnish before cooking has a higher percentage of oil to resin.  It's design purpose is to be a more flexible finish. Many also have some UV inhibitors, although urethane is not very UV tolerant, so spar urethane seems like a contradiction.   The only time I used Helmsman was (before I knew better) it lasted less than a year.  The only time I have seen it used was on an interior desk that was then riddled with pen impressions, because, well it's softer (by design).</p>]]></description><guid isPermaLink="false">42814</guid><pubDate>Sun, 05 Apr 2026 19:20:15 +0000</pubDate></item><item><title>Using OB Shine Juice</title><link>https://thepatriotwoodworker.com/forums/topic/42733-using-ob-shine-juice/</link><description><![CDATA[<p>I have used OB shine over the years on smaller pieces for people that ask for that type of finish I don't like poly for a number of reasons. Most times I get a good finish I'm satisfied with but every now and again I will get that one bowl where circular marks appear in the finish between the bottom and few inches down from lip. The only fix is to sand and try again or go to a different finish. I cannot figure out why this will happen, if its the type of wood and or other factors involving the wood grain and amount of pressure etc. Like I said I have used this method many times with good results it just every so often I will have it happen?</p>]]></description><guid isPermaLink="false">42733</guid><pubDate>Fri, 13 Mar 2026 21:32:51 +0000</pubDate></item><item><title>Five types of wood</title><link>https://thepatriotwoodworker.com/forums/topic/42712-five-types-of-wood/</link><description><![CDATA[<figure data-og-url="https://www.popularwoodworking.com/finishing/finishing-the-5-types-of-woods/" data-og-description="Woodworkers choose among dozens of wood species for projects. Unless you’ve actually used many different woods and experienced how they machine, feel, smell and respond to stains and finishes…" data-og-image="https://media.popularwoodworking.com/app/uploads/2020/01/05105006/0904-ff-3_opener-clipped-1.jpg" data-og-title="Finishing the 5 Types of Woods" data-og-site_name="Popular Woodworking" data-og-favicon_url="https://media.popularwoodworking.com/app/uploads/popwood_logos-06.png" data-og-image_width="1400" data-og-image_height="1050" data-og-user_text="https://www.popularwoodworking.com/finishing/finishing-the-5-types-of-woods/?utm_medium=email&amp;utm_source=PWW+-+NL+-+Weekly+Newsletter&amp;oly_enc_id=8675D7194445G4C#" class="ipsEmbedded_og ipsEmbedded"><div class="ipsEmbedded_og__site-name"><img class="ipsEmbedded_og__favicon" src="https://media.popularwoodworking.com/app/uploads/popwood_logos-06.png" alt=""><h5>Popular Woodworking</h5></div><img class="ipsEmbedded_og__image" src="https://media.popularwoodworking.com/app/uploads/2020/01/05105006/0904-ff-3_opener-clipped-1.jpg" alt="No image preview" width="1400" height="1050" loading="lazy"><figcaption><h3 class="ipsEmbedded_og__title">Finishing the 5 Types of Woods</h3><div class="ipsEmbedded_og__description">Woodworkers choose among dozens of wood species for projects. Unless you’ve actually used many different woods and experienced how they machine, feel, smell and respond to stains and finishes…</div></figcaption></figure>]]></description><guid isPermaLink="false">42712</guid><pubDate>Sun, 08 Mar 2026 15:51:43 +0000</pubDate></item><item><title>Woodcraft Has A New Brand Of Finishes</title><link>https://thepatriotwoodworker.com/forums/topic/42528-woodcraft-has-a-new-brand-of-finishes/</link><description><![CDATA[<div class="ipsEmbeddedVideo" contenteditable="false">
	<div>
		<iframe allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen="" frameborder="0" height="113" referrerpolicy="strict-origin-when-cross-origin" src="https://thepatriotwoodworker.com/applications/core/interface/index.html" title="Everything you Need to Know about Rubio Monocoat | Rubio Monocoat Overview" width="200" data-embed-src="https://www.youtube-nocookie.com/embed/ktiSqkrpRLU?feature=oembed"></iframe>
	</div>
</div>

<p>
	 
</p>
]]></description><guid isPermaLink="false">42528</guid><pubDate>Thu, 22 Jan 2026 16:07:46 +0000</pubDate></item><item><title>Online Finishing Articles From Popular Woodworking</title><link>https://thepatriotwoodworker.com/forums/topic/42499-online-finishing-articles-from-popular-woodworking/</link><description><![CDATA[<p>
	Click on the image for the link-
</p>

<p>
	<a href="https://act.omeclk.com/portal/public/ViewCommInBrowser.jsp?Sv4%2BeOSSucz2BJKUzdldoFg5CS%2BPmHfFRYtlMz4zQW9tN7S2h23Sfc1x%2Bd0x%2BUeEyvTC4272ihbue%2F0eAz5chA%3D%3DA" rel="external nofollow"><img class="ipsImage ipsImage_thumbnailed" data-fileid="145839" data-ratio="106.48" data-unique="ggcz5sopm" style="width: 525px; height: auto;" width="525" alt="2026-01-14 17_09_53-Your Finishing Problems_ Solved - Message (HTML).png" data-src="https://thepatriotwoodworker.com/uploads/monthly_2026_01/2026-01-1417_09_53-YourFinishingProblems_Solved-Message(HTML).png.4c1b967860a27a73841e071cb2a03f46.png" src="https://thepatriotwoodworker.com/applications/core/interface/js/spacer.png"></a>
</p>
]]></description><guid isPermaLink="false">42499</guid><pubDate>Wed, 14 Jan 2026 22:11:18 +0000</pubDate></item><item><title>Brown paper bag</title><link>https://thepatriotwoodworker.com/forums/topic/37895-brown-paper-bag/</link><description><![CDATA[<p>
	Does anyone have a WAG as to what grit a brown paper bag may be?
</p>

<p>
	600?
</p>

<p>
	800?
</p>

<p>
	1000?
</p>

<p>
	 
</p>

<p>
	Just a WAG is good.
</p>

<p>
	 
</p>

<p>
	Thks
</p>

<p>
	 
</p>

<p>
	smitty
</p>
]]></description><guid isPermaLink="false">37895</guid><pubDate>Tue, 16 Aug 2022 14:19:58 +0000</pubDate></item><item><title>Weather proof wood</title><link>https://thepatriotwoodworker.com/forums/topic/42175-weather-proof-wood/</link><description><![CDATA[<p>
	What is the best way to weather proof wood that stays outside 24/7?
</p>
]]></description><guid isPermaLink="false">42175</guid><pubDate>Fri, 17 Oct 2025 02:46:54 +0000</pubDate></item></channel></rss>
