Popular Post difalkner Posted February 8, 2018 Popular Post Report Share Posted February 8, 2018 (edited) This is more of a tip than anything else but this is as good a place to post this as any, I guess - It occurred to me this afternoon as I reached for a couple of the wedges I keep handy that maybe this isn't a normal 'go-to' for some folks so I thought I would share this. Often I find myself needing to support a long piece for driving screws, chiseling, drilling, etc. and sometimes there just isn't a convenient way to do this. So, a long time ago (eons) I cut a dozen wedges of Maple to use for jacking a suitable block to support another piece. The photos below will far better explain what I'm rambling about - 42" long piece of Walnut and needing to chisel out for hinges but to support the piece I would have to cut a block to fit. Or, I could grab a block, two wedges, and the block now is very tight and exactly the right size for support - If you already do this then great; if you don't it doesn't take long to cut a handful of these hardwood wedges to have ready for when you need them. There are other ways to do this, of course, but this is quick and easy and doesn't require any cutting or tools - just grab what's handy and go on to the task at hand. I keep a few of them on my tablesaw fence because they also come in handy if a board is trying to close up on you and pinch the blade. You can probably go back and look at some of the photos and videos I've posted and see them right there and handy. David Edited February 8, 2018 by difalkner p_toad, lew, PeteM and 5 others 5 3 Quote Link to comment Share on other sites More sharing options...
Grandpadave52 Posted February 8, 2018 Report Share Posted February 8, 2018 1 hour ago, difalkner said: It occurred to me this afternoon as I reached for a couple of the wedges I keep handy that maybe this isn't a normal 'go-to' for some folks so I thought I would share this. Great tip David...I'm a cheapskate...I keep a couple packs of window/door shims on hand...not hardwood, but usually adequate... NOW, about that case project you're working on...grandfather clock case? We need more pictures (PIP) of this...looking great so far! Dadio 1 Quote Link to comment Share on other sites More sharing options...
Dadio Posted February 8, 2018 Report Share Posted February 8, 2018 We used to call those feather wedges and had a pack taped togethe in the bottom of our tool boxes , handy little rascals. Good tip ,David, I had forgotten about that. Herb difalkner 1 Quote Link to comment Share on other sites More sharing options...
lew Posted February 8, 2018 Report Share Posted February 8, 2018 1 hour ago, Grandpadave52 said: I keep a couple packs of window/door shims on hand Me too. difalkner 1 Quote Link to comment Share on other sites More sharing options...
Stick486 Posted February 8, 2018 Report Share Posted February 8, 2018 51 minutes ago, lew said: Me too. me three.. difalkner 1 Quote Link to comment Share on other sites More sharing options...
Gene Howe Posted February 8, 2018 Report Share Posted February 8, 2018 Thanks for the reminder. Gotta pick up a couple packs. difalkner 1 Quote Link to comment Share on other sites More sharing options...
Smallpatch Posted February 8, 2018 Report Share Posted February 8, 2018 Dave, if so that will be one down to earth grandfather clock for there are feet installed on one side. Grandpadave52, HARO50 and difalkner 2 1 Quote Link to comment Share on other sites More sharing options...
HARO50 Posted February 8, 2018 Report Share Posted February 8, 2018 11 minutes ago, Smallpatch said: Dave, if so that will be one down to earth grandfather clock for there are feet installed on one side. Perhaps a RECUMBENT grandfather clock? John difalkner 1 Quote Link to comment Share on other sites More sharing options...
difalkner Posted February 8, 2018 Author Report Share Posted February 8, 2018 It's a rifle display case, will be set on a mantle to display a Henry .45 given as retirement gift by the lucky man's kids. I like the idea of the Grandfather clock, though! David Grandpadave52 and HARO50 1 1 Quote Link to comment Share on other sites More sharing options...
Gene Howe Posted February 8, 2018 Report Share Posted February 8, 2018 1 hour ago, difalkner said: It's a rifle display case, will be set on a mantle to display a Henry .45 given as retirement gift by the lucky man's kids. I like the idea of the Grandfather clock, though! David Wow, that's going to be a beauty. difalkner 1 Quote Link to comment Share on other sites More sharing options...
Grandpadave52 Posted February 8, 2018 Report Share Posted February 8, 2018 3 hours ago, Smallpatch said: Dave, if so that will be one down to earth grandfather clock for there are feet installed on one side. Ya' know Patch...I did not see those until you pointed it out. I focused on the block/wedge detail pointed out, the walnut and the basic case/lid (door to me)...never saw 'em... I never could find Waldo in all those pictures either. difalkner and HARO50 1 1 Quote Link to comment Share on other sites More sharing options...
Grandpadave52 Posted February 8, 2018 Report Share Posted February 8, 2018 4 hours ago, difalkner said: I like the idea of the Grandfather clock, though! Glad to help! If you have more of that beautiful walnut, it would be an awesome case. 4 hours ago, difalkner said: It's a rifle display case, will be set on a mantle to display a Henry .45 given as retirement gift by the lucky man's kids. There's going to be a lucky recipient of a an awesome walnut display case too. Very befitting of a Henry especially a .45... Just the same, like a little kid, you've given me a sugar OD here, so you're obligated to keep feeding (me) us with this project...I foresee a gallery project display in your (our) future. difalkner and HARO50 2 Quote Link to comment Share on other sites More sharing options...
kmealy Posted February 8, 2018 Report Share Posted February 8, 2018 Reminds me of the large theater set build I worked on last fall. We needed to clamp some parts about 4' apart. I think they have two or three clamps in the shop, max about 10". I grabbed some scrap screwed on a couple of blocks, then grabbed some tapered pieces that were sitting in the trash and pounded them in. Obvious to me, but I think I amazed some of the other volunteers. Dadio, difalkner, Gerald and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Dadio Posted February 9, 2018 Report Share Posted February 9, 2018 You make a good carpenter ,Keith, carpenters live by wedges.. Herb HARO50, difalkner and kmealy 1 2 Quote Link to comment Share on other sites More sharing options...
John Morris Posted August 27, 2019 Report Share Posted August 27, 2019 Great tip, moved from General Woodworking to Tips difalkner 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.