Jump to content
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble

Come see our annual Adopt a Gold Star Family for Christmas Project in partnership with Operation Ward 57. We have been chosen to support this mother and her two children. How can you help? Click on the proceeding link, and see our official project page where you can learn how to participate in our raffle and how you can win some fantastic prizes! Attention on Deck!!! Uncle Sam Wants You!!!!

Smallpatch

New project 25" tall

Rate this topic

Recommended Posts

My scroll saw has a clearance of 20" and this pattern is 25" long. Wasn't easy and no I didn't use a spiral blade.IMG_9406.JPG.624daccf67e45e96610c5d1be837b0a7.JPGIMG_9406.JPG.624daccf67e45e96610c5d1be837b0a7.JPG

 

Now I got to make the one on the right look like the one on the left.. This might take a few days, weeks or maybe months.

 

Oh by the way, wife does not have any real bad stuff , which we thought she might have, but the MRI showed  2 busted disk, the third and the forth, what ever that means!!

   So I went back to work in the shop for a few days. The next appointment for her is the 25th. Maybe operation or a few guided shots with the camera. Amazing what they have learned.

   Oh, I have already changed some of the stuff from the picture. It looks like there were two pieces missing so I just guessed..That's good about carving pieces for no one can say that ain't right?

  Hey we even celebrated the better news we got from the doctor by stopping at Dairy Queen on the way home!

Edited by Ron Dudelston
tags added

Share this post


Link to post
Share on other sites

Hope the wife's disc issues are resolved quickly and successfully. Are those discs in the neck? 

DQ makes the day even better. 

I see another amazing clock emerging. Keep those progress pictures coming. They are always fascinating.

Share this post


Link to post
Share on other sites

The disk are at the other end Gene, real close to her tail bone. The injury happened about 2 years ago but has progressed where she is almost at the screaming stage. I told her long ago lets go and get something done about it.  No no no.Okay when you get to where you can't stand it anymore you got to see a doctor. Thank goodness she finally gave in.

    Her sister died two years ago of cancer in her spine and my wife was almost sure she probably had the same thing.

   Cal we went to a large office supply and got what looked like this thin clear plastic would be ideal over the pattern.  Wrong...... But after removing it and pushing the jig saw over the glued down paper pattern I could cut enough out with a band saw  and the jig saw to where the scroll saw finished so it all has smooth edges that will be exposed. I didn't use the plastic shoe that comes with this jig saw but the base is a slick feeling aluminum which left the paper pattern almost in perfect shape...

     A spiral scroll saw blade was suggested but I sure don't like the finish those blades leave which would leave way too much sanding  to get the wood back to a smooth edge.

   Wow, I chose this old antique wall clock for it looked like there were way more challenges than anything I have done so far and yes, way more complicated than I could see at first.... These little carbide bits I use in the Dremel will be working overtime for a long while on this clock...

   Almost ready to start carving but first I have to free hand the lines of the carving onto the wood then a lot of guessing comes in to play.IMG_9411.JPG.cee4c0c75bbafbc85f52af839624e187.JPG 

 

The gouged out areas were where I removed the small flat headed nails to secure the clear plastic for the jig saw to glide over, but that didn't work so I ripped the plastic off...

   I seem to be learning more now than when I was in my prime wanting to learn everything.

Share this post


Link to post
Share on other sites

Glad it was the discs, then. Not cancer. Bet you both were really relived. 

Us old guys...and gals... learn faster/easier than the young'uns cuz, first of all, we've made the mistakes and can avoid them now and, we don't get as upset as we used to when something doesn't work as we expected. Plus, we probably have more patience too, cuz our minds are not going in ten different directions like when we were young.

But then, there's the remembering what we've leaned part.:unsure:

Edited by Gene Howe

Share this post


Link to post
Share on other sites

First day of grinding off the unwanted.

IMG_9416.JPG.388ec5ce987371322ba8d89c5c6df124.JPG

 

  Not gonna use the round thing in the middle holding the dial. I was just seeing how it would look sticking out this much. 

    It sure don't take me long to make a day of it anymore. Three or four hour work day is about right.

Share this post


Link to post
Share on other sites
On 10/4/2017 at 4:26 PM, Gene Howe said:

there's the remembering what we've leaned part

What's this remembering stuff?   I don't recall any of that.  :wacko:

Share this post


Link to post
Share on other sites

Super project.  Will be looking forward to see the "in progress" and "finished" pictures.

Share this post


Link to post
Share on other sites

@Smallpatch, can you please review your tag above, and then see this topic at

This tutorial will explain what tagging your content is, and the best practices for doing so. I am so grateful you have decided to tag your content, there is a proper method however and it will be explained at the topic I linked you too. In nutshell, we typically only use single word tags. So this topic the best practice would be "scrolling" "spiral blade" "clock". These are only suggestions, but you want single words or compound words that reflect your topics content. This way, in the future folks only need to click on the tag "clock" and all of Jess's clocks will appear in their search. The way you are tagging your content now, has zero affect and is not useful.

For example, go ahead and click on your tag you created for this topic, see where your browser takes you. It takes you right back to this one and only topic. That is because there is no other tag in our system like the one you have created in this topic.

Now if you would have tagged all your clock topics with the single word "clock", then when you click on the tag "clock" then all your clock topics would have returned in the search in one handy place. Same with if you added a useful tag for the species of lumber you used to build the clock, say for example if you tagged your topic with "maple". Then in the future when you or anybody clicks on the tag "maple" they will return a search of all topics that used Maple in their projects. See how useful that is?

 

Thanks a million Jess!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


About us

We are a woodworking community with an emphasis on sharing and learning the skilled craft of woodworking and all of its related disciplines. Our community is open to everyone who wishes to join us. We support our veterans and active duty both here in the United States and in Canada, being a veteran is not a prerequisite to join. So please, join us! Please click on Join The Patriot Woodworker's.

 

We support MWTCA, preserving tools and implements from the past.

M-WTCA Logo.gif

Get in touch

Follow us

Recent tweets

Visit us on Facebook

×