Search the Community
Showing results for tags 'toys'.
-
Our annual Adopt A Wounded Warrior campaign is going gangbusters! We are at about the 3/4 point in our goal. If you haven't made your pledge, please consider doing so in the next week. That gives our "Santa" a chance to do the necessary shopping to fulfill the Christmas wishes. Our Patriot Turners- Over the weekend, @forty_caliber posted one of his pecan bowl turnings. He added copper enhancements as a way to fill some voids. His post turned out to be one of the best conversations we have had in a long time, here in the Turner's Forum. I think you will find a lot of great comments that pertain not only to turning but also to creative thinking for any project. Another topic that crosses over from one forum to another was posted in the General Woodworking forum by @Gene Howe. Gene asked about our favorite wood species with which to work. Lots of great content and some super images. One of the images- @Bob Hodge is considering upgrading his lathe. His primary turning projects will be larger bowls, platters and hollow vessels. Bob asked the forum's thoughts on what might be a good lathe for his upgrade. Check out his post, our members comments and see if you can provide some input- Bob also took the time to share a couple of jewelry towers he has made. These would make excellent gifts for any wife or girlfriend (or both) who has a lot of bling! @Gerald updated us on the progress on some commissioned bowls. Looks like they are about ready to ship! Gerald also posed a question to the group asking if anyone had ever turned a full sized "Nut Cracker" soldier. None of members could really offer much in the way of useful information (although lots of wisecracks were offered up). If you have done this, or know someone that has, maybe you could help Gerald- @Ron Altier has been busy cranking out projects. The first one he showed us was some fantastic earrings. Ron has the awesome ability to combine the most gorgeous wood combinations- Ron also posted a new ornament he just finished! And speaking of ornaments, @Steve Krumanaker has made a bunch of birdhouses, Some of these are a new design for Steve and they are fantastic! He received lots of great comments and he offered additional information about how he makes the little birds. @Masonsailor is starting on his Christmas presents- I think I should take the hint! What’s Coming Up- If you are quick- Lyle Jamieson has an IRD, tomorrow (Thursday December 9, 2021), on turning natural edge, hollow forms. https://lylejamieson.com/product/december-9-2021700-930pm-eastern-time-thursday-natural-edge-hollow-form/ https://woodturningtoolstore.com/event/woodturners-retreat-six-turners-live-12-turnings-of-christmas/ For The Newbies- Hand made toys are always a treat for the little ones and with Christmas fast approaching this is a timely video from the AAW- We must be cautious when creating these, especially for those who might be thinking about chewing on the toys. The AAW has a short article with guidelines and some embedded links to more information- https://www.woodturner.org/Woodturner/Resources/Safety-Materials/Safety--Turning-Safe-Toys.aspx?_zs=ceDib&_zl=k8mr2 Lyle Jamieson has some tips on lathe speed- Expand Your Horizons- A live edge bowl from "Turn A Wood Bowl" Richard turning a little bowl. Just nice to watch his skills- New Turning Items- Craft Supplies USA has ornament kits available. A short video showing some of the products and turning a snowman. https://www.woodturnerscatalog.com/t/62/Ornaments?utm_source=youtube&utm_medium=description&utm_campaign=videos Ruth Niles has a new bottle stopper design. It is functional as a stopper as well as being able to show off the stopper top- Check it out at Ruth's site- https://nilesbottlestoppers.com/product/ss-1000/ Everything Else- Rick Turns list of last week's woodturning videos on YouTube-
- 5 replies
-
- wednesday
- wisdom
-
(and 30 more)
Tagged with:
- wednesday
- wisdom
- woodturners
- operation ward 57
- bowl
- copper
- pecan
- favorite wood
- question
- lathe
- upgrade
- jewelry
- tower
- river birch
- nutcracker
- earrings
- ornaments
- birdhouse
- lyle jamieson
- ird
- woodturners retreat
- toys
- safety
- tips
- natural edge
- richard raffan
- snowman
- kits
- ruth niles
- bottle stopper
- rick turns
- videos
-
A friend just sent me a link to a learning toy site where a lot of the toys are wooden. Obviously someone with CNC capabilities but very novel ideas. https://kodokids.com/shop Paul
-
The club's charity project has responded that wooden games are a big hit. I'm looking for some ideas that I can make a number of. Some things I've ruled out: Things that are big, have too many pieces, or take too much wood and space (e.g., cornhole, jenga) Things that take a lot of machining (e.g., holes in a Chinese checkers or cribbage board) Things are are too complex to make or learn (carving or turning chess pieces) Things like puzzles that you do once and then you have it. I've seen "Shut the Box" games that look promising, but I've never played it and wonder how it would work.
-
- 1 comment
-
- hollow form
- turning
-
(and 5 more)
Tagged with:
-
Ok Patriot Woodworker's,how'd yall do! What did Santa bring you and your shop! We had a pretty mellow Christmas this year, mama and me promised each other we'd not exchange gifts, but we did manage a couple nice ones for our kids. An Ipod 5h Gen for our youngest girl along with some books she wanted. Then we got a set of books that our oldest girl wanted, she loves the Bill O'reilly series of killing books, Killing Lincoln, Killing Patton etc. So we set her up with those and she wanted some books by William Buckley and a hand full of other books. So now she can go to school armed to the teeth for debates. Our boy scored some nice clothes and books. All went well, and we had a great time all the while not losing sight of the reason for the season. I have the greatest gift in the world, a healthy family (but for me, dealing with this incredible cough and flu!), and you guys! Thank you Patriot Woodworkers and staff for being here, and helping and contributing to our community. Let us not forget those who have served our country and paid the ultimate price, and let us not forget those families who are putting out a place mat at the table tonight for their deployed soldier or lost loved one. So, how about you all, any cool tools or machines that ended up under the tree this year?
-
For the last half dozen years or so I have been making ball and cup games and taking them to the volunteers at the local Akron Children's Hospital. This year I decided to change it up and make Harry Potter wands. I have a dozen done so another dozen to go. Made them from some 5/8" birch dowels 48" long. Each one yields four wands. The handle comes from some spindles I salvaged from a crib I saw on garbage day some years ago. Each spindle yields four handles so they work well with the dowels. Here is the dozen done so far. There are seven similar ones and that is the design I am going with. I guess there is no exact model for them.
- 14 replies
-
- wands
- harry potter
-
(and 2 more)
Tagged with:
-
View File Workbench Magazine Jan-Feb 1967 Chest For Doll Clothes This is a scanned document of the now defunct Workbench Magazine of this era. Permission was granted by the new Workbench Publication for The Patriot Woodworker community to copy and use the old Workbench Magazine at our pleasure, and for free distribution and re-use. Submitter John Morris Submitted 03/16/2018 Category Wooden Toys
-
-
Put things away when I get done....yeah...right.... See anyone you know? But wait, there is more.. One more time? Some things do get put away, though.. Couple open spots....I put a few things away..and something else takes their place.. But...it at least had some work to do... That steel ruler? Not just a yardstick.....a Tinner used it when making all sorts of "tin cans" I managed to get a little work done, today...inspite of the mess......
-
A while back I got a set of plans for a kids rocking dinosaur. It was printed on both sides of a large piece of paper and folded like a road map. The parts were "traceable" as advertised, BUT large pieces of carbon paper were required and the various parts had lines that crisscrossed each other all over the place. To keep the original plans I tried making a copy but that turned out to be a mess. Then I got a bright idea and sent it off to MEBCWD to see if he could work his magic and turn it into a CNC file. He emailed me a file back that showed up like this. Mike is good with Aspire. He's even better than good, and ...... reasonable. $$ well spent. Got busy cutting parts out of 1" panels and 2 x 12's Parts are cut out!!! I took the edge off the exposed edges with a round over bit and did a little (very little) sanding. The rockers were just mirrored, so they were exactly alike. A cut up piece of 1 x4 and the platform was made. Now the big test. Will the parts all go together. So far so good! A couple of minor adjustments and the dino fit on the platform. There's 2 - 2 1/2 " construction screws in each foot driven in from the bottom. Mixed up some Rustoleum Hunter Green and Gloss White paint and made a mess. You can saw a wooden ball in half and make fancy eyes or cheat like I did and go to Michaels. The mouth is just painted on. It could be Vcarved if you wanted to do the two sided carving step. Advantage of using the CNC --- all the parts are as exact as you need for assembly. The band saw was never turned on. Each part is exactly the same allowing you to make 3-4-5 units at a time. Or, as many as desired, even if it's just one. Sanding is minimal. More on the finishing surface than the edges. Once you have a file on a thumb drive, you save it and bring it out whenever needed.
-
From the album: Construction Truck
Actually, I didn't have to use the CNC to cut any of the parts. But, they were all uniform, the holes lined up, and I'm sure it saved some time doing it all by hand, and risking just being a little off - especially the holes that the dowel rods had to go thru connecting the right side to the left side. Besides, I had wanted to see if I could make parts that actually made something. -
From the album: Construction Truck
Found it easier to put sections together and then assemble the sections together -
From the album: Construction Truck
Started assembling the rest of it. The parts actually went together pretty good, since they were all cut according to the plans, and sized correctly. -
From the album: Construction Truck
Started with the main frame. Since I've never done this before and it was for my grandson, I used Titebond Ultimate and then used construction screws for good measure. I don't think I needed the screws cause the glued up parts were really solid. If I make any more of these, I'll just clamp and glue. This was going to take a while to make just a single unit, but if the parts were all cut and available, with knowing what fit where I may make a few more to try and sell. I won't put Caterpillar out of business, that's for sure. -
From the album: Construction Truck
Got some hard maple boards, files loaded in the CNC, and a plan to make my 18 month old grandson a toy truck. This thing makes great wheels. The axle holes are all the same size and centered. I have to cut 8 of these which will make 4 double wide construction tires. I guess I could have bought them, but I'd never know then, would I. Everything will be cut from 1" hard maple, except the dowels (which were bought), and the box, which will be cut from some poplar panels I have on hand. This way the sides and bottom will be one piece when cut out. -
From the album: Construction Truck
These are all the parts cut out, using the CNC. Hope they fit. Sure seems like a lot of parts for a simple toy truck. -
From the album: Construction Truck
-
From the album: Construction Truck
-
From the album: Construction Truck
-
Finished and painted ---- Rustoleum 2X --- I'm not real good at this painting stuff
honesttjohn posted a gallery image in Toys
From the album: Construction Truck
-
From the album: Construction Truck
-
-
View File Workbench Magazine 1966 May-June, Tank Car Toybox This is a scanned document of the now defunct Workbench Magazine of this era. Permission was granted by the new Workbench Publication for The Patriot Woodworker community to copy and use the old Workbench Magazine at our pleasure, and for free distribution and re-use. Submitter John Morris Submitted 01/04/2017 Category Wooden Toys
-
Version 1.0.0
15 downloads
This is a scanned document of the now defunct Workbench Magazine of this era. Permission was granted by the new Workbench Publication for The Patriot Woodworker community to copy and use the old Workbench Magazine at our pleasure, and for free distribution and re-use. Got kids! Even if you don't this Locomotive Toybox chest will bring out the kid in any woodworker. I thought this would be a fun one to publish here today, basic construction, and perhaps this will end up in a child's life by Christmas! Have fun! -
View File Workbench Magazine 1962 Jan-Feb Locomotive Toybox This is a scanned document of the now defunct Workbench Magazine of this era. Permission was granted by the new Workbench Publication for The Patriot Woodworker community to copy and use the old Workbench Magazine at our pleasure, and for free distribution and re-use. Got kids! Even if you don't this Locomotive Toybox chest will bring out the kid in any woodworker. I thought this would be a fun one to publish here today, basic construction, and perhaps this will end up in a child's life by Christmas! Have fun! Submitter Courtland Submitted 09/13/2015 Category Furnishings
-
- box
- workbench magazine
- (and 5 more)