Welcome to our new theme for The Patriot Woodworker. You can choose from a variety of colors, and background images by clicking on the "paint brush" icon, or the "image" icon. We want your feedback for our new theme. Please go to the topic "Beta Testing New Themes" for feedback, questions, and concerns.
Since you are here, you are willing to keep an open mind and help us improve this new theme to fit the general needs of our entire community. Thank you for your feedback in advance!
Search the Community
Showing results for tags 'fabric softener'.
Found 1 result
If you recall, I cut and sized some walnut strips for a rifle case. After setting on the bench a day, the strips developed bows. I wanted to save all my labor so, the pictures below, with verbiage added, detail my high tech solution. First a couple of de-bending chambers were required. One 10' section of sewer pipe, cut in half did the trick. Had to cement end caps on each. The work Mate came in handy, too. The formula for the de-bending solution and it's application is quite complicated so, pay close attention. First, fill both de-bending chambers with water. Then add wood. Finally add 3 capfuls of the De-Bending Fluid. Sometimes called Bending Fluid. Better known as Fabric Softener. Ideally, it should be in direct sun, too. Let the solution do it's thing for 24 hours or so. . While the wood is "cooking", prepare your clamping station. Here is mine, with all the clamps and cauls ready for action. After the solution has sufficiently permeated the wood, take it to the clamping station. Take your time. It's not critical that it get clamped immediately like steam bending. Mine were arranged for the most expeditious use of clamps, then covered with wax paper to prevent rust forming on the clamps. Wasn't worried about the wood. It gets ebonized, anyway. I'll let this set for 72 hours and then, test for dryness. It won't get unclamped until it's dry.