Jump to content
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble
Strawberry Orange Banana Lime Leaf Slate Sky Blueberry Grape Watermelon Chocolate Marble

joe the gas man

  • Content count

  • Joined

  • Last visited

About joe the gas man

  • Rank

Profile Information

  • First Name
    Joseph K
  • My Location
    Park Rapids mn
  • Gender
  • My skill level is
  • Favorite Quote
    no matter where you go, there you are.
  1. I may have crossed the line

    Looks greek to me...
  2. First attempt at boxes

    I like to use common felt from the fabric store. I use spray adhesive such as 3M super 77 to glue it to paste board, ie; cereal boxes. glue to the printed side with the raw untreated side to the wood interior of my box. Since my wife is a quilter, I inherited her old rotary cutter and cutting mat. with careful measurement I get really clean lines in the corner. I have done it so many times that it goes really fast for me now. The inside of an oval would be really simple. calculate and cut so there is a bit of overlap and trim to fit in small increments.
  3. Joinery fit precision

    I had an issue with some chinesium 1/8" endmills that were always giving me oversized cuts. even after measuring the bit with a digital caliper. So, I just kept telling v carve pro the bit was an increment smaller until it worked out. The .125" bit needed a setting of .11" to get the results I was going for. Not sure how this works, but if it works I dont futz with it!
  4. What's On Your Work Bench?

    Some mighty nice toys in your toybox there, sir! And a beautiful piece of stock as well.
  5. Dust and Chips

    I will admit that since I own an xcarve, I am partial to them. But I realize that there are many more capable machines out there, both commercial and home brewed, with price tags to match. That being said, many on the inventables forum have made a diverter for the outlet of the dewalt 611 commonly used on the x carve that while letting the air flow, keeps it from blowing the dust and chips (swarf?--- maybe not) all over and allowing the dust shoe to do it's job. Some have even managed to design a diverter to take advantage of this flow and utilize it to direct the mess into the shoe. I wonder if there is enough ingenuity out there to do this for other routers/spindles?
  6. So what about inventables machines?

    The xcarve is a good machine to learn on, both in how a machine goes together and what the work flow is IE; design, generate g code, set up the material i n the machine and create your masterpiece. It is not a some simple assembly required and plug in and go machine, however. You would be assembling the whole thing, pulling the wires, bolting up the rails, mounting the motors and fiddling around getting it fine tuned. But in the end you willl be well aquainted with the finer points of it. when something goes awry, you should be able to figure it out and correct it. It's also open source. you are not only allowed to make modifications to the unit, it's encouraged. There is a very vibrant and welcoming and helpful online community to interact with specifically regarding the xcarve and many modifications that have been made to individuals machines. How far you want to take it is up to you. Myself, I have made a few changes anf it will do most any thing I need aside from cutting steel but others have done this. Many machines got folks started and now thier machines only vaguely resemble the original. One member had even developed a screwdrive system that replaces the belts altogether and is offering kits for it on the forum. Is it designed for all day every day cabinet shop use for cutting parts? Not really. Is it a gateway machine into the world of cnc? HECK YEAH! It does what I ask of it, 2d and 3d embellishment of the projects I like to create,. and It's capable of much , much more. Here are a few pics of what I have done with mine,
  7. Putting the CNC to work!

    Since I have had one in my shop for a couple of years now, I would like to put in a plug for the maker of my cnc machine. Inventables.com It's a smaller machine (1000mm x1000mm or about 30"x30") but with software techniques, one can work to infinite lengths in one direction. I have many times done engraving on 8' deck boards for a local restaraunt and have another to do today. Price is around 1600 for the macine and there is free software available or you can use 3rd party software at extra cost, which I use and prefer. On thier forum there is even a for sale and trade section for used machines that folks have tried but just lost interest or other factors and are looking to sell. You do have to put the machine together but this is helpful in the learning process so if something goes awry, you can resolve it easily. Is it a high end commercial machine? No. But it will let one "get thier feet wet" in the world of cnc at a lower price point and do what a cnc should do. I dont work for them BTW but I do believe in the company. and thier customer service is top notch to say the least. Ok, End of shameless plug.
  8. Putting the CNC to work!

    Fantastic job on your cabinets and I agree with a previous responder, a lovely assistant/model ta boot!
  9. Wood Swimmer

    I think I can figure out how it was done but I would like to see for myself. Way cool !
  10. What's On Your Work Bench?

    Looks like beer thirty! In an air conditioned space!
  11. What's On Your Work Bench?

    Cliff, once everything settles back down, you will be able to go through everything and make your shop "New" again. I'd like to find myself in a similar situation but as soon as I think about stirring things up to rearrage and clean another project request comes in. uhoh, gotta go weld a bolt onto the smoker!
  12. Another CNC guy...

    He'll use the nose as a donut collection device...
  13. Fine Woodworking Magazine

    I have been playing around in this hobby for a bit more than 20 years and I understand what Kmealy is saying. But I have a similar experience with wood working stores. or the woodworking shows, (when they actually come to a town close enough for me to go) I walk in with a bit of giddy expectation and either I already have a version most of what they are offering or it's in an area of interest that has i have no interest in. Over time I have aquired most of what I need for what I like to do. There was a time that almost every magazine had a kernel if wisdom or insight that appealed to me, but now, I have some experience in the craft, but by no means any sort of expert, and much of what I find is a rehashing of something I have already seen. Speaking for myself alone, I think it's that my perspective has changed rather than the content of the publication as a whole. it can not be easy to find subject matter to put in between the covers every issue that will keep both novice and experienced practitioners engaged. and most magazines will ebb and flow in terms of quality, and my subscription habits tend to follow accordingly. I have found popular woodworking to be refreshing recently as there is a lot more text than photos and drawings than in the past and on subjects related to the wood working hobby yet not just "cut these pieces and join them this way" project instruction manuals.
  14. Another CNC guy...

    I lurk about on here a lot, and post occasionally. I say welcome as well. And nice work! I got into the cnc side of things with my woodworking a couple of years ago when I picked up an x-carve machine from Inventables with the intention of using it to add another dimension to my abilities and enhancements to my projects that I would most likely not be able to otherwise. Here is one that I just put the finishing touches on this evening, it's a retirement gift for a gal in the main office of my employer. Your handle (name ) suggests to me Bemidji, Mn. area? Park Rapids here.
  15. I've been Rubeing again

    I was working on my atv recently trying to put a nut on a bolt that some doublejointed, short of stature and common sense engineer with small hands located in a place that no bolt or nut should have ever been placed. As luck (or reality ) would have it, I dropped the phlarkin nut and it went halfway to never never land but I could still see it. I have a roll of mechanics wire, about 16 gauge and very flexible and some 5/16" rare earth magnets, I put a hook into the end of a piece of wire, put tape over it so that if i get ti stuck on something else I dont lose the maget and go fishing. I got the nut, and then used my latest creation to get the nut onto the bolt even! Necessity is the mother of invention.

About us

We are a woodworking community with an emphasis on sharing and learning the skilled craft of woodworking and all of its related disciplines. Our community is open to everyone who wishes to join us. We support our veterans and active duty both here in the United States and in Canada, being a veteran is not a prerequisite to join. So please, join us! Please click on Join The Patriot Woodworker's.


We support MWTCA, preserving tools and implements from the past.

M-WTCA Logo.gif

Get in touch

Follow us

Recent tweets

Visit us on Facebook